Testing

Electrical

Mesh Global has the capability to test components or full systems. We have specialist electronics testing capabilities including high voltage testing. We only use calibrated gauges and sensors to verify components and systems are within specified tolerances.

Control system functionality, interlocks and machine interfaces can all be tested to prove the system operates as it was intended and that the required standards are achieved.

Hydraulic

Our custom built testing wet bays with CCTV monitoring and remote pressure control contain the test item and protect personnel. Pressure test certificates with charts and recorder calibration are provided.

Fluid

Mesh Global has its own specialist equipment for flushing oil and water based fluids to AS4059 / NAS 1638 / ISO 4406 standards, resulting in fluid contamination reports and a certificate of cleanliness.

Using calibrated automatic particle counters, testing can be completed at our facility or alternatively, equipment is available for hire with technician support.

Maintaining quality clean fluid is paramount to control system reliability. Failure to maintain a high standard of cleanliness is a common cause of downtime. We can supply integrated fluid monitoring systems, quickly and easily installed, affording an additional defence and routine record of fluid maintenance. When added to our discrete UV sterilising unit the control and maintenance of system fluid cleanliness can be kept at the highest possible standard.

We look forward to hearing from you.

Testimonials

 

Abersea Engineering have always provided a 1st class service to Dolphin Drilling. Their engineers are passionate about what they do and have years of knowledge between them to provide excellent solutions to any work scopes they are challenged with executing. Safety is always at the forefront of any task and Abersea personnel work safely and meticulously to get the job done right, first time. Day or night they have always provided an engineering solution to any issues encountered with our control system, Abersea really do provide a service beyond expectations and are a joy to deal with.

- Subsea Superintendent/Drilling Contractor

 

 

The Project team and Rig Crew on the Endurer were very impressed with the way the guys conducted themselves while they were here and would like to commend them for their hard work. Everyone involved in the Endurer Maintenance Stop is very impressed and appreciate the hard work that you guys have done.

- Mechanical Engineer/Drilling Contractor

 

 

Completion was ahead of schedule and all parties involved in the project were impressed with how efficient and focused on quality Abersea were, a real pleasure to work with and will certainly be using Abersea on any future projects.

- Director/Engineering Company

 

 

Having only 5 weeks to manufacture, install and commission a full BOP control system was a huge task which you saw through without hesitation. The rig are delighted with the end product and we look forward to working with you again in the future.

- Subsea Manager /Drilling Contractor

 

 

We have been using Abersea Engineering for the last 10 months. It’s very refreshing to work with a company that is so proactive in its approach to meeting customer requirements. From our involvement with them it’s apparent they have a very highly motivated team who have the necessary skills and commitment to complete workscopes on time and to a high standard. They have and can react quickly to customer requirements and actually do what they say they will do. We find this to be a major benefit to the way we like to conduct our operation.

- Subsea Manager /Drilling Contractor

 

 

In an industry that is currently going through uncertain times and with greater emphasis on cost savings, Abersea have so far proved to be a good choice for Maersk Drilling as a vendor. They listen to our needs and provide good ideas and solutions to save both time and cost.

- Well Control Equipment Electrical Superintendent/Drilling Contractor

 

 

We have been using the services of Raisepower for approximately nine years and they have provided excellent support and are very knowledgeable regarding control systems. We have had many items of equipment overhauled or refurbished to a high standard, onshore and offshore by Raisepower and the quality of personnel performing the work has been of a high standard. I would have no hesitation calling Raisepower.

- Operations Director/Transocean

 

 

Just a quick note to record our thanks to the entire Raisepower Team you provided for the BOP Hydraulics works on the ENSCO 80 during recent Shipyard Project at ABLE Seaton Port in Hartlepool. Your project team was competent, productive and well lead, interface and co-ordination meeting input was both positive and proactive, the dynamic and changing nature of the works and aggressive schedule could not have been achieved without your excellent communication and visibility maintained on all critical issues, with actions and reactionary workshop and supply chain support being first class. The excellent performance by Raisepower made a positive contribution to a successful shipyard project.

- Project Manager/ Drilling Contractor

 

 

As you know we are very close to the completion of Solaris project and I would like to take this opportunity to thank you and to extend our thanks to your colleagues involved in the Solaris project. It is good to see that close and professional cooperation, an open dialog with ourselves, Raisepower and Abersea resulted in a safe, efficient and economical job execution on one of the most difficult and challenging exploration project in NCS. We will not hesitate to contact you should a future need arise and by that time we wish you the best for your future projects.

- Rig Intake Superintendent/Operator

 

info@mesh-global.com

MONTROSE l +44(0) 1224 877113
Mesh House, Brent Avenue, Montrose, DD10 9PB

BRISTOL l +44(0) 1934 623235
Crown Works, Oldmixion Crescent, Weston-Super-Mare, North Somerset, BS24 9AX

ABERDEEN l +44(0) 1224 875161
Unit 1, Burnbank Business Centre, Souterhead Road, Aberdeen, AB12 3LF